<th id="e59ia"></th>
      <output id="e59ia"></output>

    National Service Hotline139-5148-8215
    Your location: Home>>News>>Industry News
    Consultation hotline139-5148-8215

    Yancheng Suwen Machinery Co., Ltd.

    Mobile phone:13951488215
    Zip code:224022
    Address:No. 16 Fumin Road, Yifeng Industrial Park, Dazhenghu Town, Yancheng City, Jiangsu Province

    Industry News

    Brazing process of vacuum brazing furnace

    The process of vacuum brazing includes preparation, assembly, filling of solder, and application of flow inhibitor (if necessary) before brazing the parts. Brazing, vacuum brazing furnace discharge inspection. According to the structural condition of the components, the filling of solder can also be carried out before assembly....

    What is the impact and correlation of vacuum degree of vacuum brazing furnace

    In order to ensure sufficient brazing permeability, reasonable alloying reaction, avoid the occurrence of brazing defects in vacuum brazing furnace, and obtain good brazing joints, it is necessary to choose brazing parameters reasonably. The process parameters of vacuum brazing furnace vacuum brazing include vacuum degree, heating speed of vacuum brazing furnace, stable temperature and time, brazing temperature of vacuum brazing furnace, brazing time, cooling method, and outlet temperature of vacuum brazing furnace....

    What are the components of a vertical vacuum hot pressing sintering furnace

    The vertical vacuum hot pressing sintering furnace includes the furnace body, furnace cover, insulation barrel, reflection barrel, heating body, upper pressure head, lower pressure head, upper oil cylinder, lower oil cylinder, and vacuum pumping part. The support mechanism of the vertical vacuum hot pressing sintering furnace with upper and lower oil cylinders is a double column structure made of hot-rolled channel steel. The upper and lower oil cylinders are respectively installed at the upper end of the support body and the middle part of the base....

    Aluminum Brazing Process Using Continuous Furnace

    1. Surface preparation of workpiece: In order to ensure the formation of uniform and high-quality brazed joints, oil stains and oxides on the workpiece surface must be removed before welding. In order to improve the brazing ability of some materials or increase the wettability of brazing fillers to the base metal, metal plating is often required on the base metal surface. (1) Clean up oil pollution....
    Record total 6 Number of pages 2 12 Next page
    <th id="e59ia"></th>
      <output id="e59ia"></output>